{"id":31306,"date":"2025-12-04T01:47:14","date_gmt":"2025-12-04T01:47:14","guid":{"rendered":"https:\/\/wingofilms.com\/?p=31306"},"modified":"2025-12-04T01:47:14","modified_gmt":"2025-12-04T01:47:14","slug":"tint-roll","status":"publish","type":"post","link":"https:\/\/wingofilms.com\/cs\/tint-roll\/","title":{"rendered":"Tint Roll<\/span>"},"content":{"rendered":"

The Complete Guide to Tint Roll: Installation, Types, and Cost Savings<\/span><\/h1>\n

You slide into the driver’s seat on a blazing summer afternoon and instantly recoil. The steering wheel is a branding iron, the leather seats scorch through your clothes, and the air is thick enough to swim in. You fumble for the AC, but you know it’ll be a long, uncomfortable wait before relief comes. Beyond the heat, there’s the glare that strains your eyes, the worry about your skin during long commutes, and the faded dashboard that tells a story of relentless sun damage.<\/span><\/p>\n

This daily discomfort has a direct and effective solution: window tinting. But stepping into the world of automotive or residential window film can be overwhelming. Confusing terms like “ceramic,” “VLT,” and “tint roll” are thrown around, and the choice between a DIY project and professional installation is fraught with questions about cost and quality.<\/span><\/p>\n

This comprehensive guide is designed to demystify the “tint roll” for the savvy DIY enthusiast and the informed buyer alike. We’ll cut through the marketing jargon with information grounded in manufacturer specifications, insights from professional installers, and material science. Our goal is to provide the clarity you need to make a confident decision.<\/span><\/p>\n

By the end of this guide, you will understand exactly what a tint roll is, the critical differences between film types, the realistic steps and challenges of DIY installation, and how to conduct a true cost-benefit analysis. You’ll be equipped not just to buy a product, but to invest in a solution that delivers lasting comfort, protection, and value.<\/span><\/p>\n

What is a Tint Roll? Understanding the Basics<\/span><\/h2>\n

Before diving into types and techniques, let’s establish what we’re actually talking about. A <\/span>tint roll<\/span><\/strong> isn’t just a sheet of dark plastic; it’s a sophisticated, multi-layered laminate engineered for performance and durability.<\/span><\/p>\n

Definition and Core Components<\/span><\/h3>\n

A tint roll is a continuous sheet of thin, polyester-based film, typically sold in various widths (like 24″, 36″, or 60″) and lengths (often 50′ or 100′). It’s the raw material used for window tinting. This film is composed of several key layers, each with a specific purpose:<\/span><\/p>\n

    \n
  1. Scratch-Resistant Coating:<\/span><\/strong> The topmost layer, a clear, hard coat that protects the film from everyday abrasions from cleaning, wipers, or incidental contact.<\/span><\/li>\n
  2. Polyester Film:<\/span><\/strong> The core of the product. This is the layer that is dyed, metalized, or infused with ceramic particles. It provides tensile strength, clarity, and is the primary medium for solar rejection.<\/span><\/li>\n
  3. Adhesive Layer:<\/span><\/strong> A pressure-sensitive adhesive that bonds the film to the glass. The quality of this adhesive determines how well the film sticks, resists bubbling, and allows for repositioning during installation.<\/span><\/li>\n
  4. Release Liner:<\/span><\/strong> A protective sheet (often clear or translucent) that covers the adhesive until you’re ready to install. It peels away to expose the sticky side for application.<\/span><\/li>\n<\/ol>\n

    How Window Tint Film Works<\/span><\/h3>\n

    The magic of a tint roll lies in its ability to manage different components of solar energy. Sunlight is composed of three main elements:<\/span><\/p>\n

      \n
    • Visible Light (VLT):<\/span><\/strong> What lets you see through the glass. Tint film allows a controlled percentage of this light to pass through.<\/span><\/li>\n
    • Infrared Radiation (IR):<\/span><\/strong> The invisible light waves that carry heat. This is what makes your car feel like an oven.<\/span><\/li>\n
    • Ultraviolet Radiation (UV):<\/span><\/strong> The rays responsible for sunburns, skin damage, and the fading of your car’s interior, furniture, and flooring.<\/span><\/li>\n<\/ul>\n

      Think of it like a high-tech filter. A basic film might just be a dark dye that absorbs some heat and light. Advanced films act more like a selective mirror or a microscopic barrier. They are engineered to let in desired visible light for clarity while reflecting or absorbing the damaging infrared heat and blocking virtually all UV rays. This selective process is what separates a cheap, dark film from a high-performance, clear one.<\/span><\/p>\n

      Choosing the Right Tint Roll: A Breakdown of Film Types<\/span><\/h2>\n

      Selecting the correct film type is the most critical decision you’ll make. Your choice will determine the performance, appearance, longevity, and cost of your project. Making the wrong choice here can lead to disappointment, whether it’s a film that fades purple, interferes with your radio, or simply doesn’t keep the heat out as promised.<\/span><\/p>\n

      Dyed Window Film<\/span><\/h3>\n

      This is the classic, entry-level tint film.<\/span>
      \n* How it’s made & how it works:<\/span><\/strong> A layer of dye is infused between the adhesive and the polyester film. It works primarily by <\/span>absorption<\/span><\/strong>—the dye absorbs solar heat, preventing it from entering the vehicle or room. This absorbed heat is then dissipated from the glass and film outward.<\/span>
      \n* Pros:<\/span><\/strong> It is the most affordable option on the market. It effectively reduces glare and offers good privacy due to its darker appearance.<\/span>
      \n* Cons:<\/span><\/strong> Because it absorbs heat, the film itself can become very hot. Over time (typically 3-5 years), the absorbed UV radiation can break down the dye molecules, leading to a faded, purple, or bubbly appearance. Its heat rejection capabilities are the lowest of the three main types.<\/span>
      \n* Best for:<\/span><\/strong> Budget-conscious projects where immediate cosmetic darkening and privacy are the primary goals, and long-term performance is less of a concern. It can be a good practice film for DIY beginners on a small, non-critical window.<\/span><\/p>\n

      Metalized Window Film<\/span><\/h3>\n

      A significant step up in performance, metalized film has been a industry standard for years.<\/span>
      \n* How it’s made & how it works:<\/span><\/strong> Microscopic metallic particles (like aluminum or titanium) are embedded within or layered onto the polyester film. It works primarily by <\/span>reflection<\/span><\/strong>. The metallic layer acts like a mirror for infrared heat, bouncing it away from the window before it can be absorbed.<\/span>
      \n* Pros:<\/span><\/strong> Offers excellent heat rejection and increased shatter resistance (the film holds broken glass together). It is highly durable and will not fade or discolor like dyed film.<\/span>
      \n* Cons:<\/span><\/strong> The metallic layer can interfere with the transmission of radio waves, potentially weakening cell phone, GPS, toll transponder, and keyless entry signals. It often has a shiny, mirror-like appearance from the outside, which isn’t to everyone’s aesthetic taste and may not be legal for front windows in many areas.<\/span>
      \n* Best for:<\/span><\/strong> Those in high-heat climates seeking strong, fade-proof performance at a mid-range price, and who are not heavily reliant on in-vehicle electronic signals.<\/span><\/p>\n

      Carbon or Ceramic Window Film<\/span><\/h3>\n

      This represents the current pinnacle of window film technology, offering premium performance without the drawbacks of metalized films.<\/span>
      \n* How it’s made & how it works:<\/span><\/strong> Non-conductive, nano-sized ceramic or carbon particles are suspended in the film’s adhesive or polyester layers. These microscopic, non-metallic particles are incredibly effective at <\/span>absorbing and blocking<\/span><\/strong> infrared heat and UV rays without using reflective metals.<\/span>
      \n* Pros:<\/span><\/strong> Provides superior heat rejection—often outperforming metalized films. It is completely non-metallic, so it causes <\/span>zero signal interference<\/span><\/strong> with any electronics. It is highly fade-resistant and offers exceptional optical clarity, meaning it looks less hazy or reflective and more like natural, tinted glass.<\/span>
      \n* Cons:<\/span><\/strong> The highest upfront cost of all film types.<\/span>
      \n* Best for:<\/span><\/strong> Drivers and homeowners for whom top-tier performance, long-term value, and crystal-clear appearance are non-negotiable. It’s the ideal choice for modern vehicles packed with electronics and for anyone seeking the best possible heat reduction.<\/span><\/p>\n

      Key Specifications to Compare<\/span><\/h3>\n

      When shopping for a tint roll, don’t just look at the name. Compare these key metrics, which should be provided by reputable manufacturers:<\/span><\/p>\n

        \n
      • Visible Light Transmission (VLT%):<\/span><\/strong> The percentage of visible light allowed through the film <\/span>and<\/span><\/em> the glass combined. This determines how dark your windows will appear. <\/span>This is the number that defines legal limits.<\/span><\/strong> State laws specify the minimum allowed VLT% for specific windows (e.g., 70% VLT for front side windows, 35% for rear windows).<\/span><\/li>\n
      • Infrared Rejection (IRR%):<\/span><\/strong> The percentage of infrared heat rays blocked by the film. A higher IRR% means better heat rejection. This is a key performance indicator for comfort.<\/span><\/li>\n
      • Total Solar Energy Rejected (TSER%):<\/span><\/strong> The most comprehensive metric. It measures the percentage of total solar energy (including UV, visible light, and infrared) rejected by the film. This gives you the best overall picture of the film’s efficiency.<\/span><\/li>\n
      • UV Rejection:<\/span><\/strong> Any quality film should block <\/span>99% or more<\/span><\/strong> of ultraviolet rays. This is non-negotiable for skin and interior protection.<\/span><\/li>\n<\/ul>\n

        DIY Tint Roll Installation: A Step-by-Step Guide & Realistic Expectations<\/span><\/h2>\n

        The allure of DIY is strong: saving money and the satisfaction of a job well done. However, window tint installation is a deceptively difficult craft. This section aims to inform, not to oversell. A successful DIY job requires immense patience, a meticulous nature, and a proper environment.<\/span><\/p>\n

        Essential Tools and Preparations<\/span><\/h3>\n

        You cannot do this correctly with just a film roll and a razor blade. You will need:<\/span><\/p>\n

          \n
        • Tint Roll:<\/span><\/strong> Precisely measured for your windows, with extra for mistakes.<\/span><\/li>\n
        • Utility Knife & Fresh Blades:<\/span><\/strong> For clean, sharp cuts.<\/span><\/li>\n
        • Squeegees:<\/span><\/strong> A hard, clear-channel squeegee for pushing out water and a soft, felt-edged squeegee for final smoothing without scratches.<\/span><\/li>\n
        • Spray Bottles (at least two):<\/span><\/strong> One for a slip solution (a few drops of baby shampoo in water) and one for clean water.<\/span><\/li>\n
        • Heat Gun or Hair Dryer:<\/span><\/strong> Essential for shrinking film to conform to curved windows.<\/span><\/li>\n
        • Microfiber Cloths & Lint-Free Paper Towels (like blue shop towels):<\/span><\/strong> For cleaning and drying.<\/span><\/li>\n
        • Razor Blade Scraper:<\/span><\/strong> To remove any old film or stubborn debris from the glass.<\/span><\/li>\n<\/ul>\n

          Crucially, you need a perfectly clean, indoor workspace.<\/span><\/strong> A garage is ideal. Even a single speck of dust will be trapped under the film forever. Wash the floor, avoid fans, and work on a still, humid day if possible.<\/span><\/p>\n

          Step-by-Step Installation Process<\/span><\/h3>\n
            \n
          1. Precise Measurement and Film Cutting:<\/span><\/strong> Measure each window pane carefully. Cut your film from the roll <\/span>larger than the window<\/span><\/strong> (add 1-2 inches on all sides). You will trim it to the exact edge after application.<\/span><\/li>\n
          2. Meticulous Window Cleaning:<\/span><\/strong> This is 90% of the job. Scrape the glass clean, scrub with a cleaning solution, and then use a clean razor blade and soapy water to shave off every bit of dirt, glue, or water spot. Finish with a lint-free towel and a final spray and squeegee. The glass should be surgically clean.<\/span><\/li>\n
          3. Applying Slip Solution and Peeling the Liner:<\/span><\/strong> Liberally spray the clean, wet window with your slip solution. On a separate, flat, clean surface, peel back a corner of the film’s release liner. Spray the now-exposed adhesive with slip solution. Carefully continue peeling the liner while keeping the adhesive wet.<\/span><\/li>\n
          4. Careful Application and Positioning:<\/span><\/strong> With the adhesive side now wet, lift the entire sheet and carry it to the window. Gently lay it onto the wet glass. The slip solution allows you to slide the film around to position it perfectly with the correct overhang.<\/span><\/li>\n
          5. Squeegeeing Out Moisture and Bubbles:<\/span><\/strong> Starting from the top center, use your hard squeegee in firm, overlapping strokes to push the slip solution out from under the film. Work from the center outward to the edges, forcing all water and air bubbles out. For curved rear windows, you must use the heat gun to carefully shrink the film to the curve <\/span>before<\/span><\/em> final squeegeeing.<\/span><\/li>\n
          6. Final Trimming and Drying:<\/span><\/strong> Once the film is perfectly positioned and smoothed, use your sharp utility knife to trim the excess film along the edge of the window seal. Use the edge of the rubber gasket as a guide. Finally, use your soft squeegee and a dry cloth to remove any remaining moisture streaks. The film will need 2-5 days to fully cure and dry, during which it may appear hazy.<\/span><\/li>\n<\/ol>\n

            Common DIY Pitfalls and How to Avoid Them<\/span><\/h3>\n
              \n
            • Dust and Contamination:<\/span><\/strong> The #1 killer of DIY jobs. Clean beyond what you think is necessary. Work in a sealed, clean room.<\/span><\/li>\n
            • Improper Cutting:<\/span><\/strong> Cutting too small leaves gaps. Cutting on the glass can scratch it. Always cut oversized and trim after application.<\/span><\/li>\n
            • Fingers on the Adhesive:<\/span><\/strong> Your skin has oils. Once the liner is off, only the adhesive side of the film or your squeegee should touch the adhesive.<\/span><\/li>\n
            • Over-Stretching:<\/span><\/strong> Pulling the film too tight, especially when heat-shrinking, can cause it to distort or even tear.<\/span><\/li>\n
            • Premature Drying:<\/span><\/strong> If your slip solution dries before you squeegee, the film will stick prematurely, creating permanent creases or bubbles.<\/span><\/li>\n<\/ul>\n

              Professional vs. DIY Installation: Making an Informed Choice<\/span><\/h2>\n

              Now that you understand the DIY process, let’s weigh it objectively against professional installation.<\/span><\/p>\n

              The Case for Professional Installation<\/span><\/h3>\n
                \n
              • Expertise & Warranty:<\/span><\/strong> A certified installer has years of muscle memory. They can complete a multi-window car in a few hours versus your likely weekend. More importantly, reputable shops offer warranties that cover <\/span>both the film material and the labor<\/span><\/strong> against peeling, bubbling, or discoloration for 5, 10, or even a lifetime.<\/span><\/li>\n
              • Results & Longevity:<\/span><\/strong> The likelihood of a flawless, bubble-free, and perfectly aligned installation is exponentially higher. This quality directly translates to a longer-lasting result.<\/span><\/li>\n
              • Cost of Mistakes:<\/span><\/strong> If a professional makes an error, they absorb the cost of a new piece of film. If you make an error, you buy another tint roll. For expensive ceramic films, a single mistake can erase any DIY “savings.”<\/span><\/li>\n<\/ul>\n

                When DIY Might Be Feasible<\/span><\/h3>\n
                  \n
                • Small, Flat Windows:<\/span><\/strong> Home sidelights, basement windows, or small square glass panels are much more forgiving than a complex, curved automotive rear window.<\/span><\/li>\n
                • Low-Stakes Practice:<\/span><\/strong> Using an affordable dyed film on an old car, a shed window, or a piece of practice glass to learn the technique.<\/span><\/li>\n
                • The Right Personality:<\/span><\/strong> If you are exceptionally patient, detail-oriented, have excellent hand-eye coordination, and view the project as a learning challenge, DIY can be rewarding.<\/span><\/li>\n<\/ul>\n

                  Cost-Benefit Analysis Table<\/span><\/h3>\n

                  | Factor | DIY Installation | Professional Installation |<\/span>
                  \n| :— | :— | :— |<\/span>
                  \n| Upfront Cost<\/span><\/strong> | Lower (cost of tint roll + tools) | Higher (labor + material markup) |<\/span>
                  \n| Time Investment<\/span><\/strong> | Very High (research, prep, installation, cleanup) | Very Low (drop off and pick up) |<\/span>
                  \n| Result Quality<\/span><\/strong> | Variable (High risk of dust, creases, or improper shrinking) | Consistently High (Flawless finish expected) |<\/span>
                  \n| Warranty Coverage<\/span><\/strong> | Typically material-only from manufacturer (if registered) | Comprehensive (Both film and installation labor) |<\/span>
                  \n| Long-Term Value<\/span><\/strong> | Potentially lower if rework or early replacement is needed | Typically higher due to durability and warranty |<\/span><\/p>\n

                  FAQ: Your Tint Roll Questions Answered<\/span><\/h2>\n

                  Q: How much does a tint roll cost?<\/span><\/strong>
                  \nA:<\/span><\/strong> The price varies dramatically by type and quality. A 100-foot roll of dyed film can start under $100. Metalized films range from $150 to $300. High-performance ceramic or carbon tint rolls can cost from $300 to over $600 for 100 feet. Remember, price correlates directly with heat rejection performance, longevity, and clarity. Always calculate the total square footage you need before purchasing.<\/span><\/p>\n

                  Q: Is it legal to tint my car windows myself?<\/span><\/strong>
                  \nA:<\/span><\/strong> This is a crucial point. <\/span>The legality of your window tint is based on the final Visible Light Transmission (VLT%) measurement, not on who installed it.<\/span><\/strong> Whether you or a pro does it, the tint must comply with your state’s laws. These laws are specific and differ for front side windows, rear side windows, and the rear windshield. It is <\/span>your responsibility<\/span><\/strong> to know the laws in your state. We strongly advise you to check the official website of your <\/span>state’s Department of Motor Vehicles (DMV)<\/span><\/strong> or highway patrol for the most current regulations. A professional installer will usually know and follow these laws.<\/span><\/p>\n

                  Q: How long does a tint roll installation last?<\/span><\/strong>
                  \nA:<\/span><\/strong> This depends on two factors: <\/span>film quality<\/span><\/strong> and <\/span>installation quality.<\/span><\/strong> A premium ceramic film has a lifespan of 10+ years. A dyed film may last 3-5 years before fading. However, a poor installation—with contamination or improper adhesion—will fail (peel, bubble) within months, regardless of how expensive the film was.<\/span><\/p>\n

                  Q: Can I remove old tint film myself?<\/span><\/strong>
                  \nA:<\/span><\/strong> Yes, but it’s often a tedious and messy process. The common method involves using a steamer or heat gun to soften the old adhesive and then carefully scraping the film off with a razor blade. The significant risk is damaging rear window defroster lines or scratching the glass. For a guaranteed clean removal, especially on rear windows with defrosters, professional removal is a worthwhile investment.<\/span><\/p>\n

                  Conclusion<\/span><\/h2>\n

                  Choosing and applying a window tint roll is a significant decision that balances performance, aesthetics, legality, and budget. The journey starts with selecting the right film technology: the budget-friendly absorption of <\/span>dyed<\/span><\/strong> film, the robust reflection of <\/span>metalized<\/span><\/strong> film, or the premium, non-interfering performance of <\/span>ceramic\/carbon<\/span><\/strong> film. This choice is then paired with the installation method: the challenging, time-intensive DIY route or the expert, warranty-backed professional path.<\/span><\/p>\n

                  For most people seeking optimal performance, durability, and peace of mind, the most satisfying long-term value comes from investing in a high-quality ceramic tint roll installed by a certified professional. This combination delivers the promised heat rejection, UV protection, and clarity, backed by a warranty that protects your investment for years to come.<\/span><\/p>\n

                  Armed with this knowledge, you are now equipped to move forward confidently. Use this guide to ask informed questions when getting quotes from installers—ask about the specific film brand, its TSER and IRR percentages, and the details of their warranty. If you choose the DIY path, you now understand the tools, preparation, and patience required to give your project the best chance of success. Whichever path you choose, a well-selected and properly installed <\/span>tint roll<\/span><\/strong> is a transformative upgrade that enhances comfort, protects your investment, and improves your daily drive.<\/span><\/p>\n

                  \n

                  METADATA_START—<\/span>
                  \nDISPLAY_TITLE: The Complete Guide to Tint Roll: Types, DIY Install & Cost<\/span>
                  \nSEO_TITLE: Tint Roll Guide: Types, DIY Installation & Cost Savings 2024<\/span>
                  \nMETA_DESC: Thinking of a DIY tint job? Our complete guide to tint roll covers dyed, metalized & ceramic films, step-by-step installation, and a true cost analysis of DIY vs. pro.<\/span>
                  \nIMG_PROMPT: A detailed, well-lit photo showing a hand unrolling a high-quality automotive window tint film on a clean glass surface. In the<\/span><\/p>\n<","protected":false},"excerpt":{"rendered":"

                  The Complete Guide to Tint Roll: Installation, Types, and Cost Savings You slide into the driver’s seat on a blazing […]<\/p>\n","protected":false},"author":2,"featured_media":31305,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[115],"tags":[],"class_list":["post-31306","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-car-wrap"],"_links":{"self":[{"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/posts\/31306","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/comments?post=31306"}],"version-history":[{"count":1,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/posts\/31306\/revisions"}],"predecessor-version":[{"id":31399,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/posts\/31306\/revisions\/31399"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/media\/31305"}],"wp:attachment":[{"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/media?parent=31306"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/categories?post=31306"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wingofilms.com\/cs\/wp-json\/wp\/v2\/tags?post=31306"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}